Fishing
Knots
SURGEON LOOP

A versatile knot for tying line to
hooks, swivels, etc.
Insert the line through the hook eye.
Leave about 8 inches for tying the knot. Bring the line tag
end back around the main line to form a loop.
Next, bring the end under the main part
of the line and over the two parallel lines.
Now, the knot has formed a "figure
8." Put the tag end of the line under the two parallel
strands, then back over all three lines.
The knot is finished by tucking the tag
end between the main line and the front part of the loop. Pull
tight and slide the knot down against the hook's eye and trim.

HOME
|
FISHING
|
BOATING
|
WEATHER
|
CONTACT
MARINAS | LINKS |
SEARCH & FAQ's | REPORTS
Disclaimer: We have taken care to ensure that the information on this web site is accurate. However we can give no absolute guarantees to the accuracy or completeness of the content of this web site. We accept no liability for any losses or damages (whether direct, indirect, special, consequential or otherwise) arising out of errors or omissions contained in this web site.
..........Design by:

|